HIGH PERFORMANCE TUNING KNOWLEDGE
Grid List
FULL WIDEBAND KIT- WEGO IV Single channel Wideband DAY114001 + 18' extension cable+ Exhaust Clamp+ Cigarette Power Adapter FULL WIDEBAND KIT- WEGO IV Single channel Wideband DAY114001 + 18' extension cable+ Exhaust Clamp+ Cigarette Power Adapter
FULL WIDEBAND KIT- WEGO IV Single channel Wideband DAY114001 + 18' extension cable+ Exhaust Clamp+ Cigarette Power Adapter

$566.25

FULL WIDEBAND KIT- WEGO IV Single channel Wideband DAY114001 + 18' extension cable+ Exhaust Clamp+ Cigarette Power Adapter These device works perfectly with your HP Tuner MPVI-Pro Device (not included) Also goes great with our GM Level 1 Learn at home Course        
Daytona Sensors Exhaust Gas Replacement Oxygen Sensor Daytona Sensors Exhaust Gas Replacement Oxygen Sensor
Daytona Sensors Exhaust Gas Replacement Oxygen Sensor

$80.00

This sensor works with all Daytona Sensors widebands.  Sometimes sensors go bad and you will need to replace yours when you least expect it. It’s always nice to have an extra one on hand for these occasions.
Daytona Sensors WEGO IV Single Channel Wideband Exhaust Gas Oxygen Sensor System Daytona Sensors WEGO IV Single Channel Wideband Exhaust Gas Oxygen Sensor System
Daytona Sensors WEGO IV Single Channel Wideband Exhaust Gas Oxygen Sensor System

$438.00

Ultra-Bright Daylight readable blue LED display. Analog Outputs for your Dyno or datalogging software included. Easily plug in to your HP Tuners Pro unit, SCT Handheld, etc… Highly accurate over AFR range of 10.3-19.5:1 AFR (error less than .1 AFR) Free-air calibration quickly/easily done with adjustment dial Standalone datalogging software...
Daytona Sensors WEGO IV Dual Channel Wideband Exhaust Gas Oxygen Sensor System Daytona Sensors WEGO IV Dual Channel Wideband Exhaust Gas Oxygen Sensor System
Daytona Sensors WEGO IV Dual Channel Wideband Exhaust Gas Oxygen Sensor System

$585.00

Ultra-Bright Daylight readable blue LED Display with auto dimmer for lighting conditions. Analog Outputs for your Dyno or datalogging software included. Easily plug in to your HP Tuners Pro unit, SCT Handheld, etc… Highly accurate over AFR range of 10.3-19.5:1 AFR (error less than .1 AFR) Free-air calibration quickly/easily done...
Daytona Sensors Mild Steel Bung
Daytona Sensors Mild Steel Bung

$10.00

Mild steel weld-in bung for the O2 sensor 18 x 1.5mm Weld Nut (for mounting wideband sensor on exhaust pipe)
Daytona Sensors 3 Bar MAP Sensor for GM Applications
Daytona Sensors 3 Bar MAP Sensor for GM Applications

$132.50

This is a genuine GM 3 bar MAP sensor for boosted applications, and the beauty of this product is that it comes WITH a pigtail (Daytona Sensors part number 102006) so you can connect to any existing harness connectors. You simply attach the included connector to the MAP sensor and then...
Daytona Sensors 12 foot Extension Cable Daytona Sensors 12 foot Extension Cable
Daytona Sensors 12 foot Extension Cable

$28.50

12 foot extension cable for added length to the Daytona Sensor Wideband
Daytona Sensors WEGO III Single Channel Wideband Exhaust Gas Oxygen Sensor
Daytona Sensors WEGO III Single Channel Wideband Exhaust Gas Oxygen Sensor

$249.95

Ideal wideband for tuning your own car (not multiple cars) Light, compact, easy to use and priced inexpensively Great for permanent installation in your car because of the small size Complete kit –includes the Bosch wideband sensor and a weld-in bung as well! 0-5 Volt Analog output signal for datalogging...
Daytona Sensors WEGO III Ethanol Reader & Dual Wideband Daytona Sensors WEGO III Ethanol Reader & Dual Wideband
Daytona Sensors WEGO III Ethanol Reader & Dual Wideband

$665.00

This awesome new product from Daytona Sensors is dual purpose:  It's able to provide on-the-fly readings of the Ethanol content in your fuel, or display the wideband's AFR reading with the flip of a switch!  Highly accurate Ethanol content reading using the included GM sensor.  Watch our video on how...
Daytona Sensors Stainless Steel Bung Daytona Sensors Stainless Steel Bung
Daytona Sensors Stainless Steel Bung

$10.00

Stainless Steel Weld-In Bung for the O2 Sensor 18 x 1.5mm Weld Nut (for mounting wideband sensor on exhaust pipe)
Daytona Sensors 2 Bar MAP Sensor for GM Applications Daytona Sensors 2 Bar MAP Sensor for GM Applications
Daytona Sensors 2 Bar MAP Sensor for GM Applications

$114.50

This is a genuine GM 2 bar MAP sensor for boosted applications, and the beauty of this product is that it comes WITH a pigtail (Daytona Sensors part number 102006) so you can connect to any existing harness connectors. You simply attach the included connector to the MAP sensor and...
Daytona Sensors 18 foot Extension Cable Daytona Sensors 18 foot Extension Cable
Daytona Sensors 18 foot Extension Cable

$32.25

18 foot extension cable for added length to the Daytona Sensor Wideband  

Recently Viewed Products