This is a genuine GM 2 bar MAP sensor for boosted applications, and the beauty of this product is that it comes WITH a pigtail (Daytona Sensors part number 102006) so you can connect to any existing harness connectors.
You simply attach the included connector to the MAP sensor and then clip your old sensor's connector off and crimp or solder it to the included wires off the end of the pigtail.
No more hours of searching for a 2 bar MAP sensor that will work with your existing connector!
Tech specs:
This sensor reads up to 2 bar, or 15 PSI of boost. If you are planning to run more than 15 PSI of boost, we recommend the Daytona Sensors 3 bar MAP sensor.
The Tuning School
