PLEX KNOCK MONITOR V2
The quintessential tool for tuners, available now with single or optional dual knock inputs.
Tune like a pro and never miss knock again.
The Plex Knock Monitor V2 delivers reliable audio and visual knock detection even for the most challenging projects. Available in single and dual input versions (up to 8 cylinders) it comes bundles with an advance PC analysis and configuration SW> Built with a rugged aluminum enclosure for rigorous use.
Features: Best-in-class Audio Quality. Improved SNR (signal-to-noise ratio) by 20dB, with much higher audio clarity and 10 times lower noise.
Transflective Display 2.3'' transflective LCD display offers better viewing in daylight and outdoor conditions thus enabling knock detection on the device without a PC being always necessary.
Dual Knock Sensors Inputs Optional dual-knock sensor input with increased dynamic range, suitable for twin bank engines or for enhanced knock detection. Choose whether to split the audio channels per sensor or listen to them combined. 0-5V Analog Load Sensor Input Connect a MAP or TPS sensor and perform 3-dimensional knock data on the device or PC.
Non-volatile Device Logging Memory Capture 3-dimensional knock information and log knock count with knock level per cylinder versus RPM and load.
Dual Audio Output Sockets Benefit from the two audio output sockets by using them either for training your apprentices or for cross-checking the knock signal with colleagues.
Higher-Performance Processor New higher performance main processor improves the calculating speed making the monitor faster and smother in operation/ Dual Power Options!
Now you can power up your knock monitor not only externally but also via its USB port. Detect knock with higher convenience irrespective of where you are.
Isolated USB Port USB port isolation provides electrical protection, more robust device communications and added noise immunity.
Isolated Trigger Input. Optically isolated trigger input protects the device from ignition signal noise & related electrical damage.
Optional CAN BUS Port - send knock level, knock count, knock threshold and per-cylinder knock data to your dyno, ECU or other external logger.
Per Cylinder Detection - The ignition tripper input allows you to detect knock per cylinder for up to 8 cylinders.
Advanced Audio Filtering - Steep 30 dB band and high pass filters that isolate knock from background noise for every engine type.
Frequency vs Bore Size Cal. - A built-in engine bore size reference lets you select the knock frequency by simply choosing the cylinder size.
Bright LED Warning - Configurable 2-level knock intensity alarm will get your attention in the dyno room even without having the headset on.
Threshold vs RPM - Accurately detect knock throughout the engine RPM range. View on device or laptop.
Plex loom length - 8ft
Is compatible with the following Dynamometer companies:
A new version of the Knock Monitor V2 software is available and can be
downloaded from the following link: HERE
The software includes a new firmware version v0.72.
The changes vs the previous v0.70 version are:
NEW: Realtime data are saved and can be exported in CSV format
NEW: Option for ignoring realtime data when rpm is dropping
NEW: Firmware files included with the application
NEW: The application checks for and installs updates automatically
IMPROVED: USB communications and status indication
IMPROVED: Auto change between rpm and time rolling X axis depending on preset mode
FIXED: Realtime could not be used after reading the device configuration
FIXED: CAN BUS Tx ID was not saved correctly
FIXED: The selected preset was not saved when changed from the PC Software
This new version of the software also has an automatic update capability so after it is launched it will check for updates online. If an update is found it will be downloaded and installed on the next software start.